GB
9. Troubleshooting
Problem
Possible cause
Remedy
Motor will not start / motor stops
Safety key is not inserted
Insert safety key (see 5. Initial
while working
Operation)
Battery is not inserted
Insert Battery (see 5. Initial
Operation).
Red LED light flashing
Charge Battery (see 5. Initial
Battery is not charged
Operation).
Green LED and Error LED
Put product out of the sun,
both lights flashing
Wait 15 minutes for product
Motor temperature is high
to cool down and re-start.
Yellow LED and Error LED
Put product out of the sun,
both lights flashing.
Wait 15 minutes for product
Battery temperature is high
to cool down and re-start.
Red LED and Error LED
Put product out of the sun,
both lights flashing
Wait 15 minutes for product
Controller temperature is high
to cool down and re-start.
Error LED light flashing
Clear obstruction and re-start.
Overcurrent/motor is blocked
Error LED light on continuously
Product to be checked by
Controller failure
GARDENA Service.
Abnormal noise
Screws/components loose
Tighten screws or product to be
Excessive Vibration
checked by GARDENA Service.
Blade fitted incorrectly
Product to be checked by
GARDENA service.
Foreign bodies on the blade
Remove foreign bodies.
Blade very dirty
Clean blade.
Blade damaged
Product to be checked by
GARDENA Service.
Poor grass collection
Cutting height too low
Raise cutting height
(see 6. Operation - Cutting
height adjustment).
Grassbox is full
Empty grassbox
(see 6. Operation -
Grassbox full window).
Grass discharge chute is blocked/
Remove grass
grass has collected under deck
(see 8. Maintenance - Cleaning).
Lawn cuts unevenly
Blade is blunt
Product to be checked by
GARDENA Service.
Grass is too long
Raise cutting height
(see 6. Operation - Cutting
height adjustment)
Lawnmower becomes
Grass is too long
Raise cutting height
heavy to push
(see 6. Operation - Cutting
height adjustment)
IMPORTANT:-
Beware of sharp blade ! Wear Gloves
20
3. Using a soft brush, remove grass clippings from the vision window
.
4. Wipe over the surface of your lawnmower with a dry cloth.
56
IMPORTANT:-
Never use water for cleaning your lawnmower. Do not
clean with chemicals, including petrol, or solvents - some can destroy
critical plastic parts.
56
Important :
Unplug the safety key and remove battery.
