The watering duration is preset to 30 minutes at the factory.
Emergency programme :
If no sensor is inserted in sensor-con-
trolled watering mode or if the connection cable is faulty, watering
will take place every 24 hours. The watering duration depends on
the run time but is limited to a maximum of 30 minutes.
v
Hold the
Menu
button down for 5 seconds.
The normal display appears on the screen again.
If a value in the programme is to be changed, this can be
changed without changing the other values in the programme.
1. Press the
Menu
key twice.
Start
and the hours flash on the display.
2. Press the
Menu
button to jump to the next programme level
– or –
change the programme data with the rotary button and confirm
by pressing the
OK
button.
When the watering duration is changed while a program is
running, the current watering cycle is ended.
The valve can be
opened or closed manually at any time
.
A program-controlled open valve can also be closed early
without changing the program data (watering start time,
watering duration and watering frequency).
The controller must be fitted.
1. Press
Man.
-key to open the valve manually
(or to close an open valve).
Run Time
and the watering time in minutes (set to
30
minutes
in the works) flash for 10 seconds on the display.
2. Whilst the watering time in minutes is flashing, the watering
duration can be modified with the rotary button (between
0 :00
and
0 :59
) (example:
10
minutes) and confirm with the
OK
-key.
3. Press
Man.
-key to close the valve early.
The valve is closed.
The amended manual opening period is stored, i.e. each time
the valve is opened manually in future the modified opening
period is preset. If the manual opening period is amended to
0 :00
, the valve is closed and also remains closed after the
Man.
-key is pressed (child lock).
If the valve has been opened manually and a programmed start
of a watering period overlaps the manual opening period, the
programmed starting time is suppressed.
Example :
The valve is
opened
at
9.00 a.m. manually
, the opening period is
30 minutes. A program with a
start time (START)
between
9.00
and 9.30 a.m.
will not be undertaken in this case.
9
GB
Manual operation :
1.
2.
Read / modify
watering programmes :
1.
Exit soil moisture sensor-
controlled watering again :
