5. Place the sling back (I) between the right
arm (F) and left arm (G), lining up the holes
on the sides. For each hole, insert an
M6 x 40 L bolt (AA) through an M6
washer (II), through back of the arm and into
the sling back (I). Do not tighten completely.
Repeat this procedure on the other side of
the sling back (I) to attach the other arm.
Hardware Used
M6 x 40 L Bolt
x 4
M6 Washer
x 4
5
6. Align the hole at one end of a short hanging
bar (L) with the sleeve under the front of the
arm. From the inside, insert an M6 x 45 L
bolt (BB) through the sleeve, through the
short hanging bar (L), through an M6
washer (II) and into an M6 nut (GG). Do not
tighten completely. Attach the long hanging
bar (M) to the back of the arm using the same
procedure. Attach remaining two hanging
bars to the other arm in the same way.
Hardware Used
M6 x 45 L Bolt
x 4
M6 Washer
x 4
6
AA
II
II
BB
6
ASSEMBLY INSTRUCTIONS
I
M
L
BB
II
GG
AA
AA II
II
M6 Nut
x 4
GG
HANGER ASSEMBLY
G
F