8
ASSEMBLY INSTRUCTIONS
Hardware Used
Hardware Used
2. Attach the glass cap (D) to the wire guard
assembly (E) using nuts (CC), washers
(DD) and nut removal tool (FF) to tighten.
3. Attach the wire guard assembly (E) to the
housing assembly (I) using short bolts
(EE).
1
3
Nut
Washer
washer
x 4
x 4
Short Bolt
x 4
Hardware Used
x 4
Short Bolt
1. Remove the door from the housing
assembly (I) by lifting the door off the
hinges. Insert the bottom of the housing
assembly (I) into the top of the plastic ring
(J) and attach to base (K) with short bolts
(EE). Re-attach the door.
2
Nut removal tool
x 1
