9
.
Gas odor with extreme yellow tipping of flame.
.
Heater does NOT reach the desired temperature.
.
Heater glow is excessively uneven.
.
Heater makes popping noises.
Ґ
.
Spiders and insects can nest in burner or orifices.
This dangerous condition can damage heater and
render it unsafe for use. Clean burner holes by using
a heavy-duty pipe cleaner. Compressed air may help
clear away smaller particles.
.
Carbon deposits may create a fire hazard. Clean
dome and burner screen with warm soapy water if
any carbon deposits develop.
Note: In a salt-air environment (such as near an ocean),
corrosion occurs more quickly than normal. Frequently
check for corroded areas and repair them promptly.
TIP:
Use high-quality automobile wax to help maintain the
appearance of your heater. Apply to exterior surfaces from
the pole down. Do not apply to emitter screen or domes.
Storage
Between uses:
.
Turn Control Knob OFF.
.
Disconnect LP source.
.
Store heater upright in an area sheltered from direct
contact with inclement weather (such as rain, sleet,
hail, snow, dust and debris).
.
If desired, cover heater to protect exterior surfaces
and to help prevent build up in air passages.
Note: Wait until heater is cool before covering.
During periods of extended inactivity or when
transporting:
.
Turn Control Knob OFF.
.
Disconnect LP source and move to a secure,
well-ventilated location outdoors.
.
Store heater upright in an area sheltered from direct
contact with inclement weather (such as rain, sleet,
hail, snow, dust and debris).
.
If desired, cover heater to protect exterior surfaces
and to help prevent build up in air passages.
.
Never leave LP cylinder exposed to direct sunlight or
excessive heat.
Note: Wait until heater is cool before covering.
Service
Repair to gas passages and associated components
should be done only by a qualified service person.
Caution:
Always
allow
heater
to
cool
before
attempting service.
Limited Warranty
(Model # HPS-C-SH)
The manufacturer warrants to the original consumer-purchaser
only that this product (Model #
HPS-C-SH
) shall be free from
defects in workmanship and materials after correct assembly
and under normal and reasonable home use for the periods
indicated below beginning on the date of purchase. The
manufacturer reserves the right to require photographic
evidence of damage, or that defective parts be returned,
postage and/or freight pre-paid by the consumer, for review
and examination.
• TUBE BURNERS: 1 year
LIMITED
warranty against
perforation.
• COOKING GRIDS and FLAME TAMERS: 1 year
LIMITED
warranty; does not cover dropping, chipping, scratching, or
surface damage.
• STAINLESS STEEL PARTS: 1 year
LIMITED
warranty
against perforation; does not cover cosmetic issues like
surface corrosion, scratches and rust.
• ALL OTHER PARTS: 1 year
LIMITED
warranty (Includes,
but not limited to, valves, frame, housing, cart, control panel,
igniter,regulator, hoses) *
Does not cover chipping, scratching,
cracking surface corrosion, scratches or rust.
Upon consumer supplying proof of purchase as provided
herein, Manufacturer will repair or replace the parts which
are proven defective during the applicable warranty period.
Parts required to complete such repair or replacement shall
be free of charge to you except for shipping costs, as long as
the purchaser is within the warranty period from the original
date of purchase. The original consumer-purchaser will be
responsible for all shipping charges of parts replaced under
the terms of this limited warranty. This limited warranty is
applicable in the United States and Canada only, is only
available to the original owner of the product and is not
transferable. Manufacturer requires reasonable proof of your
date of purchase. Therefore, you should retain your sales