ASSEMBLY INSTRUCTIONS
Attach the back for cushion chair (C) to the seat
for cushion chair (B). Align the holes, insert an
M6 x 25L bolt (Ka) through a metal washer (Kg), the
back for cushion chair (C) and secure into the seat for
cushion chair (B). See Fig. 1. Repeat procedure for
the other side. Do not tighten completely.
Attach the left arm (A2) to the seat (B). Align the
holes, for upper hole insert an M6 x 50L bolt (Kd)
through a metal washer (Kg), the arm (A2) and
secure into the front crossbar of the seat (B). For
lower hole insert an M6 x 50L bolt (Kd) through a
metal washer (Kg), the arm (A2), the bracket of the
seat (B) and secure with a nut (Kh). See Fig. 2. Do
not tighten completely. Then insert an M6 x 60L
bolt (Ke) through a metal washer (Kg), the arm (A2),
the back (C), another metal washer (Kg) and secure
with a nut (Kh). See Fig. 3. Do not tighten completely.
Repeat procedure for the right arm (A1). Securely
tighten all bolts. (Note: the arm label with “left” or “right”).
1
2
3
4
All parts are shrink wrapped together. Remove all
components from the box and place on top of the
box. Carefully cut the wrapping open. Count and
identify all parts.
Attach the seat for loveseat (D) to the back for
loveseat (E). Align the holes, for each hole on the side
insert an M6 x 25L bolt (Ka) through a metal washer (Kg),
the back for loveseat (E) and secure into the rear crossbar
of the seat (D). See Fig. 5. Do not tighten completely.
For each hole in the medium insert an M6 x 30L bolt (Kb)
through a metal washer (Kg), the rear crossbar of the
seat (D) and secure into the back (E). See Fig. 6. Do
not tighten completely.
5
3
Kg A2
Kg
Ke
Kh
G
F
Ka
Kg
C
B
Kd
Kd
Kg
Kh
Kg
C
A1
B
A2
Ka
Kb
Kb
Kg
Kg
Kg
D
E
Place the back cushion (F) and seat cushion (G)
onto the assembled chair frame and fasten to the
frame. See Fig. 4. Repeat procedure for the other
cushion chair.
Fig. 1
Fig. 3
Fig. 2
Fig. 4
Fig. 5
Fig. 6
