ASSEMBLY INSTRUCTIONS
Insert the bracket of a long crossbar (B) into a
long crossbar (C). Line up the holes, and insert
a short bolt (Na) through a small metal
washer (Ne), the long crossbar (C) and secure
into the bracket of long crossbar (B) for total of
three holes. Don’t tighten completely. Repeat
procedure for remaining hole with an U shaped
bracket (Nl). Securely tighten all bolts. Repeat
procedure for the other pair long crossbar (B, C)
and 2 pairs of the short crossbars (D, E). See
Fig. 1 and Fig. 2.
For each leg post (A), place an U shaped
bracket (Nl) onto the top of the leg post (A), and
insert a short bolt (Na) through a small metal
washer (Ne), the U shaped bracket (Nl) and
secure into the leg post (A). See Fig. 3. Don’t
tighten completely.
Attach the assembled long crossbar (B&C) to
the leg posts (A). Line up all holes and for each
hole from outside insert a medium bolt (Nb)
through the L shaped bracket of the leg post (A),
the crossbar (B&C), a large metal washer (Nd)
and secure with a Nut (Nf). See Fig. 4. Repeat
procedure for the other crossbar (B&C) and two
crossbars (D&E). See Fig. 5. Tighten all bolts
and nuts. NOTE: Small thinner net bars of
crossbars (B,C,D,E) should on outside.
1
2
3
4
Nf
Nd
B
A2
A1
E
D
E
B
C
D
C
B
A1
A2
Ne
Na
Na
Ne
Nl
B
C
A1
C
B
A2
Nb
Nf
Nb
Nd
E
Na
Ne
Nl
Fig. 1
Fig. 4
Fig. 2
Fig. 5
D
E
Ne
Na
Na
Ne
Nl
Fig. 3
