5
2
Step 5: With the help of another person, carefully place the natural stone table top onto the table base.
Guide the bolts in natural stone table top (assembled in Step 2) into the holes of the “L” metal
brackets as shown in Fig. 4. After making any necessary adjustments to the alignment of the
bolts in the natural stone table top and the “L” metal brackets, add a nuts, spring washers and
Ø18x1.5 mm washer to the end of each bolts, as shown in Fig. 5, and tighten. Do not over
tighten.
Your table is now ready for use. If you have any questions, please call our Customer Service Center
at 1-800-416-3511.
IMPORTANT NOTE: Damage to welds or frames resulting from over tightened bolts or imporper
assembly is not covered under our warranty. Please read all instructions carefully before assembly.
If you have any questions regarding your assembly, call our Customer Service Center at 1-800-416-3511.
