GARDEN MASTER GM1818 Скачать руководство пользователя страница 8

Страница: 8 / 8

5. FLAT FLOOR CLAMP

For existing flat concreted areas

using dyna-bolts. (Bolts need to

be ordered separately).

6. RECESSED FLOOR CLAMPS

For specially poured concrete

floors. We recommend the

recessed concrete floor system

as it provides greater protection

from wind lift and moisture

entering under your shed. (Pre-

bent bolts available separately).

7. RECHARGABLE LED

SENSOR LIGHT

Handy for when the light is poor.

Sensor automatically turns the

unit on and off to ensure you can

find what you need even at night.

8. WORKBENCH

This sturdy workbench will be

the perfect addition to your shed.

Made from solid timber with a

handy pegboard for your tools.

(Tools not supplied).

1. SHELF BRACKETS

Hangs from the wall to allow

maximum use of valuable floor

space. Includes 3 x ply shelves,

1200mm x 300mm.

2. TOOL RACKS

6 racks & 2 wallstrips. Keep your

tools off the floor.

3. FLOORS

We offer kitset wooden floors for

every size of shed. Treated timber

sits directly on the ground. The

floor may need pegging into the

ground in windy areas.

4. HOOKS

Coming in a set of four.

GARDEN MASTER SHED OPTIONAL EXTRAS

WE WOULD REALLY

LIKE YOUR FEEDBACK

Please email your comments to [email protected] or fax us on
06 878 5758. Customer satisfaction is our top priority and we are always on the look
out for ways in which we could do better.

FREE GIFT

To receive your free gift, simply include your details when you send in your feedback,
or send us a photo of your finished shed with your details.

TO HELP YOU WE HAVE LISTED SOME QUESTIONS

THAT YOU MAY LIKE TO ANSWER:

There is no need to type every question, only the question number and your answers
are necessary for us.

How did you find out about us?

If you found us through our website, was it easy to navigate?

Did you find the assembly instructions easy to follow?

Where did you purchase your shed?

Was the sales person helpful and courteous?

What did you like best about your garden shed purchase?

Are there any parts of our service that you think we could improve upon?

THANKS FOR YOUR HELP!

Содержание GM1818









Результаты поиска

Содержание GM1818

Отзывы:

Похожие инструкции для GM1818

Бренды по названию

Популярные бренды

GARDEN MASTER GM1818, Руководство по сборке

Результаты поиска

Содержание GM1818

Отзывы:

Похожие инструкции для GM1818

Бренды по названию

Популярные бренды