7 / 25
2. Intended use
This appliance is only intended, as an electric lawn scarifier and; as an electric lawn rake, for aerating
lawns and grassy areas in private domestic and hobby gardens.
It is not designed for use in public areas, parks, sports areas, and in agriculture and forestry.
Using the application for any other purpose is considered incorrect and unapproved. The manufacturer is not
liable for any damage or injury resulting from such use. The user is entirely responsible for any associated risks.
It is our policy to continuously improve our products and we therefore reserve the right to change the product
specification without prior notice.
3. Description
See Fig. 1
1.
Safety switch / plug combination
2.
Guide bar
3.
Safety flap
4.
Ventilator
5.
Lawn scarifier
6.
Scarifier cylinder
7.
Rake cylinder (optional)
8.
Collecting bag (optional)
4. Assembly
Guide bar
(Fig. 1, A, B, C)
Insert the lower guide bar section (1) to the housing.
Slide the cable holder (2) onto the upper guide bar (3).
Connect guide bar by inserting both side the supplied bolts (4) and swing nut (5).
On the bottom side of the housing, fix the guide bar with 2 supplied screws (6) using a screwdriver.
Safety switch
(Fig. 1, D)
Open the cover of the safety switch (1).
Place safety switch over the holes (2) on the guide bar.
Closed the cover and tight the switch by supplied two screws (3).
Using supplied two cable clips to hold cable.
Collecting bag
(Fig. 1, E)
Pull the safety flap upwards and hold.
Attach the holder of the collecting bag (1) to the hooks onto the housing (2).
5. Preparation
Setting the working depth
(Fig. 2)
Caution! Only with the motor switched off and the blade shaft at a standstill!
The cutting height is adjusted directly from two front wheels.
5 different cutting height settings are available for each individual wheel.
Pull the level (1) and move it forward or backward to the desire the working depth for both wheels, the
position should be set at the same height.
