8
Assembly
Fitting and removing the mount for the telescopic handle
Holding the hand grip on your shears with one hand, and the mount for the
telescopic handle with the other, push firmly in the direction of the arrow as
shown below. The mount will lock into place. To remove reverse the action by
pulling firmly in the opposite direction.
Fitting the telescopic handle and wheels
Push wheels (2) onto the spindle pressing firmly right until they stop as shown
below.
Connect the telescopic handle to the shears by inserting as shown below, it
will click into place. To remove the telescopic handles press the green mount
release button.
Connect the power connector on the telescopic handle into the charging
point on the rear of the handle grip, location shown below.
