ASSEMBLY
Keep plastic bags out of the reach of children and dispose of safely.
Please read the safety recommendations before use.
Keep these instructions in safe place for future reference.
Before starting read these instructions carefully. Please note that because of the nature of cast
metal, you may find roughness on the surface and the design. This “one of a kind” look enhances the
beauty of the product and is not a defect.
Assembly should be done by two people: one person to hold the pieces while the other fastens the
bolts.. The stove is heavy and cannot be lifted by one person alone.
Do not fully tighten any nuts and bolts until all pieces are assembled.
Lay out all pieces before assembly.
1. Connect the Legs (C) to the Stove Body (A) using the Through Bolts (G), and securing them in
place with the nuts and washers provided.
2. Assemble the Air Vent Latch (H) as shown in the diagram on page 2.
3. Slot the Flue Collar (B) into place at the back of the stove.
4. The Handle (I) provided is used to help safely manipulate the stove.
It is recommended that installation be carried out by a
licensed professional.
An incorrectly installed stove can cause serious accidents and
poses a serious health risk.
Содержание Sedgley
Страница 2: ......
