GARDASOFT PP610, Руководство пользователя

Страница: 45 / 50

PP610/612 LED lighting controllers - User Manual
11 Reference information
Parameter Value Notes
Digital supply
voltage (VS+) 7VDC (min)
40VDC (max)
regulated Ideally set this voltage as low as
possible to reduce the total unit
power dissipation.
Digital supply
current 125mA (max)
Load supply
voltage (LD+) 48VDC (max)
regulated Must be at least 1V greater than
the load potential difference at
maximum required current.
Input enable
level (IP
H
)
Input disable
level (IP
L
)
24>IP
H
>4.5V
IP
L
<1V
This is the voltage applied
between the anode and cathode
of each optically isolated input.
Output current
per channel 4A continuous
or10A pulsed Maximum allowed current per
channel. Average current when
pulsing must not exceed the
maximum allowed continuous
output.
Ambient
temperature
during
operation 5° to 40°C
Maximum
relative
humidity during
operation 90%rH non-
condensing
Total unit power
dissipation
without
heatsinking P
D
=10 Watts
(max)
This is the sum of (V
S
-V
F
) x I
L
for
each current output, where:
I
L
=Output current load (Amps)
V
F
=Load forward voltage
— 45 —