PP610/612 LED lighting controllers - User Manual
Set the output current
RCfCcVvEe
Where:
f
output channel (1 or 2)
c
output selection. Set to
0
for non-selected
operation.
v
output current (in milliamps)
e
maximum current rating of the LED. This is
optional; if not required, omit
Ee
from the
command.
In the following example, output channel 1 is set to pulse a current of
5.35A for 9ms triggered by input 1, with a delay of 8ms, and a de-bounce
period of 20ms. The maximum current rating of the LED has been set
to 7A.
RT1M1P9D8
Channel 1 triggered by input 1,
delay = 8ms, pulse width = 9ms.
RC1C0V5350E7000
Current = 5.35A, maximum LED
current = 7000mA
—
44
—
