GARDASOFT CL190, Руководство пользователя

Страница: 32 / 36

CL190/CL191 Lens Controller - User Manual
10 CL191 reference information
This section of the user manual contains information about the CL191's
specification, ratings and restrictions, and event and error codes.
10.1 Specifications and ratings
CL191
Output
channel One channel, including constant current lens drive
and lens EEPROM data communications.
Automatically reads data from EEPROM inside lens
which calibrates the controller response. The
performance of the controller is therefore
automatically tailored to each individual lens.
Lens
compatibility Compatible with Optotune™ EL-3-10, EL-10-30,
and EL-16-40 lens ranges. Full current calibration
with lens temperature compensation.
Operating
modes Single configurable optical power, single shot or
continuous waveforms 0.03Hz to 200Hz. Two optical
powers, selected by digital input Optical power set
by analog input.
Digital input 10V-24V, PNP compatible
Analog input 0V to 10V, 7K input impedance. Nominal 12-bit
resolution.
Refocus
latency 1ms (not including communications delays).
Output
current -250mA to +250mA in 0.07mA steps.
Output
voltage Up to 3V
User interface UART and I2C.
Power supply 4.5VDC to 5.5VDC.
Operating
temperature 5°C to 50°C
Humidity Up to 95% non-condensing
Dimensions 50mm x 20mm
Mounting Central 2mm screw hole.
— 32 —