Fig. 4
Place the auxiliary handle to telescopic tube which near to rear handle (1), adjustment the
auxiliary handle to a comfortable working position and tighten the screw (A) by Allen key
(B)firmly.
Assembly and use of the shoulder strap (Fig. 5 and 6)
The shoulder strap is recommended for carrying the machine around when not in use.
Fig. 5 Fig. 6
Assembly
Use your thumb or fingers to squeezing the safety lock piece (A), put the hook to the
hanging part (B) of the tool.
Move slide buckle (C) to adjust the length of the shoulder strap. Adjust the length of the
shoulder strap to obtain a comfortable working position. A few practice swings without
starting motor should be made to determine correct balance.
Put the shoulder strap over your right shoulder. Carry the tool engine at the right side of
your body.
Dis-assembly:
Remove the safety lock piece in the opposite way.
Never attach the strap diagonally across your shoulder and your breast,
but rather place it on one of your shoulders. In this way you can remove
the tool quickly from your body in case of danger.