TALL CABINET, RESIN – WALL MOUNT ASSEMBLY INSTRUCTIONS
STEP #4
A. CUTOUT TEMPLATE ON PAGE 6 OF THESE INSTRUCTIONS, PLACE AS SHOWN ABOVE AND MARK THE HOLE
LOCATIONS. THE HOLE ON THE INSIDE ALREADY MATCHES A PRE-EXISTING BOSS. DRILL THROUGH THE
PANELS WITH A 1/8” DIA DRILL BIT.
B. LOCATE THE HANDLES AS SHOWN WITH THE PADLOCK HOLES IN-LINE AND SCREW THE HANDLES IN
PLACE.
STEP #5:
A. SNAP THE DOOR BIN (J), QTY 1, INTO THE TRACK LOCATION ON THE INSIDE OF THE DOORS WHERE
DESIRED. NOTE: IT CAN NOT BE PLACED IN FRONT OF A SHELF.
B. SNAP THE SHELF CLIPS (I), QTY 12, INTO THE VERTICAL TRACKS AROUND THE INSIDE OF THE CABINET
BODY ON THE PANELS. THERE ARE QTY 4, CLIPS PER SHELF AND THE QTY 2, CLIPS WITH THE ARCHED HOOD
ARE TO BE LOCATED IN THE BACK OF THE CABINET AND THE QTY 2, FLAT TOPPED CLIPS ARE ON THE SIDES.
C. PLACE THE SHELVES (C), QTY 3, ON THE SHELF CLIPS. THE FRONT SHELF LIP CAN BE LOCATED UP OR
DOWN. IF YOU DO NOT WANT ITEMS POSSIBLY ROLLING OFF THE SHELF, PLACE UP. APPLY THE GT LOGO (K),
QTY 1, ON THE LOCATION SHOWN.
PG 4 QUESTIONS ???? CALL 1-866 664 2724 REV 1, 10/11
