J
B
DETAIL B
SCALE 1 : 6
I
I
I
P
G
C
C
DETAIL C
SCALE 1 : 12
PADLOCK
HOLES
C
INSTALL DOOR BIN, SHELVES AND LOGO
SNAP THE DOOR BIN (J) IN THE TRACKS ON THE INSIDE OF THE DOOR.
A.
SNAP THE SHELF HOLDER STRIPS (i) X8 , INTO THE VERTICAL TACKS AROUND THE INSIDE OF THE CABINET. THERE ARE
B.
X4 STRIPS PER LOCATION. THE STRIPS WITH THE ARCHED HOOD ARE IN THE BACK OF THE CABINET AND THE FLAT
TOPPED STRIPS ARE ON THE SIDES.
PLACE THE SHELVES (C) X2, ON THE STRIP HOLDER STRIPS (i).
C.
APPLY THE GT LOGO (P), X1, ON THE LOCATION SHOWN.
D.
ADDITIONAL SHELVES (C) CAN BE PURCHASED AS P/N: GT1007.
INSTALL HANDLE SET
A. ORIENTATE THE HANDLE SET (G) AS SHOWN WITH THE PACKLOCK HOLES IN-LINE ON EACH HANDLE AND ARE AT THE
BOTTOM OF THE HANDLE SET.
B. DO NOT USE A POWER TOOL. HAND SCREW AND SECURE THE HANDLE WITH A 1 1/2" SCREW (H) & 7/8" LONG SCREW
(K) PER SIDE SIDE.
C. ADJUST THE HANDLES TO BE IN-LINE AND LEVEL BY LOOSENING AND RETIGHTENING THE SCREWS AS NEEDED.
PAGE 4 OF 4 REV AUG 2021
