14
Placing the stickers ensures that you can quickly find the balance point every time
simply by lining up the stickers.
NOTICE
If you plan to use only one or two of the bikes at a time, you can use the
remaining stickers to indicate the balancing points for each scenario.
If one bike is used more often than the others, you may want to place it
in the center. This may allow the lifter to stay balanced when the center
bike is removed without needing to reposition the frame.
Bikes of varying sizes should be positioned the same each time or the
sticker placement will not indicate the correct balance points.
11.
Use the
Device Control
screen on the MyLifter app to lift the bikes until the wheels
are barely touching the floor.
12.
In the MyLifter app, tap the
Set Low
button to set the smart low point.
13.
Tap the
Manual Lift Up
button to lift the bikes to the ceiling, making sure to leave
six inches of ceiling clearance.
CAUTION
When you use the Manual Lift Up button, make sure you do not run the pulley frame
into the MyLifter. Running the pulley frame into the lifter could cause damage to the
lifter, damage personal property, or cause personal injury.
14.
Tap the
Set High
button to set your smart high point.
Now you can easily lift or lower your bikes with the simple tap of a button.
