Install the Controller Device to the garage
opener
1.
STEP 1 : Connect Controller to Opener
Ø
Locate the 2 exposed wires coming out of the
Controller
.
Ø
Insert the 2 exposed wires into the terminals on the back of your
Garage Door Opener
.
2.
STEP 2 : Install the Sensor
Ø
The sensor has 2 parts. Both sensor parts must be mounted parallel to
each other, and they must be 3 – 15 mm apart, not touching.
Ø
Mount the sensor with wire on the
garage frame wall
, and mount
the sensor without wire on the
top of garage door
.