GAPOSA SileoXS XSDC30, Быстрый старт

Страница: 8 / 8

1
1
2 3
2
ON
OFF
ON
A5
GAPOSA srl - via Ete, 90 - 63900 Fermo - Italy
T. +39.0734.220701 - F. +39.0734.226389 - info@gaposa.com
www.gaposa.com
13. DELETING A TRANSMITTER OR A CHANNEL
Using the transmitter to be deleted press
and hold both the
PROG-TX
and
STOP
buttons until the motor makes a small jog.
Only the transmitter used for this procedure
has been deleted from motor memory.
14.ERASE TRANSMITTER MEMORY (DELETING ALL THE
TRANSMITTERS OR CHANNELS OR SENSORS)
Option 1 - Using a programmed transmitter
Press and hold both the
PROG-TX
and
STOP
buttons for at least 15 seconds: to confim
that the operation has completed, the
motor first makes a brief jog and after
5 seconds it makes an additional jog.
This operation will not work unless it
makes both jogs.
Memory is now empty.
< 15”
5”
1. Activate sleep mode: click the push
button (the motor makes 2 jogs)
2. Wake up the motor: click the push
button (the motor makes 1 jog)
3. Within 8 seconds, using any Gaposa
transmitter, press and hold both the
PROG-TX and STOP buttons until the
motor makes a long jog.
Memory is now empty
1. Switch the motor power supply power Off. Then
switch it ON.
2. Within 8 seconds, using any Gaposa transmitter,
press and hold both the PROG-TX and STOP
buttons until the motor makes a long jog.
Memory is now empty
for Li-Ion integrated battery motor
for power operated motor
Option 2 - Using a new transmitter without ID
(not paired).