3
SD card slot
USB port for using U disk
USB port output 2.4A for charing
car radio
Ope
n Frequency:
88.1-107.9MHz, step size:100kHz
Max.ERP: 33.68 dBuV/m
Hardware Version: V1.3
ware Version: V1.0
Environmental Condi ons:
Working Temperature -15~ 40
℃
Working humidity 65+/-20%RH
88.1-107.9MHz can be used in Europe without restric on.
Hereby, Gaoyi Tech Limited, declares that this FM player / B-31, is In compliance with the essen l Requirements
and other relevant provisions of RE Dir
ve 2014/53/EU.
Version:V1.0
Date:2017.7.20
Manufacturer: Gaoyi Tech Limited
Address: 5th Floor, Building F2, Huafeng Industrial Zone, Hangcheng Road Xixiang Town, Bao An District,
Shenzhen,China
FCC NOTE：
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may
not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
The manufacturer is not responsible for any radio or tv interference caused by unauthorized modifications or change to this
equipment. Such modifications or change could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
