ZP-EPC10
5
(05/2000)
Security Measures
Safety Measures
Danger by Electric Current
• The device must be connected to the appropriate power supply.
• Only use a suitable adaptor (see technical data).
• Disconnect the adaptor from the mains supply when an error occurs.
• Only use the adaptor and device in a dry, weather protected environment.
• If safe application of the device is no longer guaranteed, it should not be used but be
protected against inadvertent handling. Safe use is no longer possible, e.g.
– when the device or cables are visibly damaged,
– when the device does not work properly,
– when the device has been exposed to rain or wet conditions,
– when the item has been pierced,
– after prolonged storage in unfavourable conditions or after difficult transportation.
Have the device checked by CBC.
Installation
• When installing the device, electrical engineering regulations should be adhered to.
• Follow the instructions for installation and operation other equipment, e.g. cameras.
These instructions contain important advice on safety and approved use of equipment.
• Carefully follow guidelines for installation and use. Not doing this could lead to personal
injury, damage to property or to the equipment itself.
Repair and Maintenance
• Never open the housing of the protocol converter. The device does not contain parts
that you can repair or replace yourself.
• Ensure that repair or maintenance work is carried out by qualified personnel (electrical
engineers).
