Ganz ZN-S100AE, Руководство по оборудованию

Страница: 12 / 21

GANZ MPEG-4 Encoder Series Hardware Manual
2010/2-1 O 12
Please pay attention to electric characteristics during installation.
(Detailed instructions are being prepared.)
⑤
RS-232C Terminal Block (RS-232C)
RS-232C Terminal Block is used for some devices such as POS terminal block.
Figure 11. RS-232C Connection
⑥
RS-485 Terminal Block (RS-485)
The RS-485 serial port consists of DATA+, DATA- and GND as following Figure 12.
Figure 12. RS-485 Connection
⑦
,
⑩
LAN Connector (Ethernet)
This is a RJ45 LAN connector for 10/100 Base-T Ethernet.
⑧
,
⑪
Power Adaptor Connector (DC 12V)
ZN-S4000AE needs a DC 12V 3A adapter for power supply, and ZN-S1000AE/2000 uses a DC 12V
1A adapter.
⑫
Reset Switch (Reset)
Reset switch is used for restarting GANZ encoder or resetting GANZ encoder as Factory Default
(FD). Refer to ‘4.1. Factory Default Settings’ for detailed procedures.
⑬ Video Input BNC Connector (Vin)
This connector is used for video input.