Ganz ZN-DN312XE-M, Руководство по установке

Страница: 15 / 21

01A.01 15
7. When the dialog box appears to request user name and password, enter the default
value for the administrator account (case-sensitive) as below:
ID : root
Password : pass
8. Refresh the page and check if the live streaming images are successfully displayed on
a monitor.
6.2.2.View video using IP address
Users may view the live streaming images on a web page using the device’s IP address. To have
the correct IP address ready and access through a web page:
1.
Convert a MAC address to an IP address check the IP address on the IPAdminTool. Refer to
Appendix (D). Hexadecimal-Decimal Conversion Table .
(The MAC address is attached on the side or bottom of the device.)
2. Open a web browser and enter the IP address of the device.
3. Grant the Security Certificate Alert and install the ActiveX if those have not been completed
yet. .
4. Wait for a few seconds while the web page loads. The live streaming image is displayed.
6.3. Reset
1. While the device is in use, press the Reset button.
2. Wait for the system to reboot.
6.4. Factory Default
1. Press reset button and hold.
2. Release the Reset button after LED blinks for 5 seconds.
3. Wait for the system to reboot.
The factory default settings are described as below:
IP address: 192.168.xx.yy
Network mask: 255.255.0.0
Gateway: 192.168.0.1
User ID: root
Password: pass
MAC address = 00-13-23-01- 14 - B1 → IP address = 192.168. 20 . 177
Convert the Hexadecimal number to Decimal number.
ZN-DN312XE-M Installation Guide