Ganz ZM-TY110A, Инструкция по эксплуатации

Страница: 4 / 8

EG-4
FCC & ICES Information
Warning
This equipment has been tested and found to comply the limits for a class A digital device, pursuant to part
15 of the FCC Rules and ICES-003 of Industry Canada. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial environment. This
equipment generate, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
User-Installer Caution
Your authority to operate this FCC verified equipment could be voided if you make changes or
modifications not expressly approved by the party responsible for compliance to part 15 of the FCC Rules.
GENERAL
Scope
The information in this instruction manual covers the installation and operation of the Colour Monitors.
These units should be installed using approved materials and wiring practices in accordance with the
National Electrical Code and applicable local wiring ordinances.
Introduction
The Colour Monitors are designed primarily for industrial applications this monitor accepts standard EIA
colour input signals.
Operating controls (BRIGHT, CONTRAST, COLOUR, TINT, SHARP, VOLUME) are located on the front
panel. A power switch is also located on the front panel.
A regulated power supply maintains excellent performance during fluctuations in line voltage.
The Colour Monitors are housed in a metallic dark-gray colour cabinet.