Ganz ZC-L1210NHA, Инструкция по эксплуатации

Страница: 5 / 32

EG-5
INSTALLATION & ADJUSTMENT
1
Mounting The Camera
2
Power Supply Cable Connection
12V DC:
Connect power supply cable to the power input terminal. In case of 12VDC,
make sure of the proper polarity. Improper polarity may cause damage to
the camera.
24V AC: Connect power supply cable to the power input terminal. In case of 24VAC
60Hz, Line Lock mode can be selected by DIP switch in order to synchro-
nize the picture to the AC power supply.
3
Adjustment of View Angle and Focus
Take the lens hood off by turning
it counter-clockwise. Adjust view angle and focus by
turning the levers. Then tighten
the lock screws. Align the markings on the lens
hood and camera body. Then turn
the hood clockwise to lock.
Mount the camera with the bracket on a wall or a ceiling.
Ceiling Mount Wall Mount