EG-7
SPECIFICATIONS
EDR Type
Digital Day/Night model
True Day/Night model
Model No.
YCX-05
YCX-05N
TV system
NTSC
Scanning system
2:1 Interlace
Image sensor
1/3-type Interline transfer CCD
Effective pixels
976 (H) x 494 (V)
Scanning frequency
15.734kHz (H) / 59.94Hz (V)
Video output
1.0V (p-p) / 75
Ω
Horizontal resolution
700 TVL
Min. Illuminance
F1.2
Night mode
AGC Extreme
50IRE
SENS UP: OFF
0.3 lx (Color) / 0.03 lx (B/W)
0.07 lx (Color) / 0.007 lx (B/W)
SENS UP: ON (x512)
0.0006 lx (Color) / 0.00006 lx (B/W)
0.00014 lx (Color) / 0.000015 lx (B/W)
30IRE
SENS UP: OFF
0.15 lx (Color) / 0.015 lx (B/W)
0.035 lx (Color) / 0.0035 lx (B/W)
SENS UP: ON (x512)
0.0003 lx (Color) / 0.00003 lx (B/W)
0.00007 lx (Color) / 0.000007 lx (B/W)
S/N ratio
More than 50dB (At minimum AGC gain)
Gamma characteristic
0.45
Sync. System
Internal synchronization (INT.) / Line Lock (L.L.) : For 60Hz regions only
Electronic shutter
Electronic shutter ON: 1/60 s to 1/100,000 s.
* The shutter speed ranging from 1/1,000 s to 1/5,000 s can be set by 1/500 s
1/60 sec. fixed (Flickerless: OFF), 1/100 sec. fixed (Flickerless: ON)
Iris control
DC IRIS
DC-drive auto-iris lens
AES
Fixed iris lens (1/60-1/100,000 sec. automatic electronic shutter)
VIDEO IRIS
Video-drive auto-iris lens
Vcc=DC 9.4V, 50mA max, video signal: 0.7V (p-p) (high impedance)
Extended Dynamic Range (EDR)
ON / OFF
Backlight Compensation (BLC)
ON / OFF
White balance
ATW (Normal / Wide) / AWB / Manual
SENS UP
ON: Auto (x2 to x512) / OFF
Day/Night setting
Auto / Color Fix / B / W Fix
Noise Reduction (2D/3D-DNR)
Extreme / High / Middle / Low
Electronic zoom
ON (16 times max.) / OFF
Defog
Image correction ON / OFF
Profile setting
Standard / high sensitivity / casino / sodium vapor lamp / profile
AGC
ON (Extreme / High / Middle / Low) / OFF
ALC
-20 to +20
HLC
Detection level: 1-3 steps
Easy focus
Enabled
Privacy Mask
ON (16 spots max., 10 colors, mosaic) / OFF
Motion detection
Detects all areas. 6 (horizontal) × 4 (vertical),
24 pixels in total (minimum block), sensitivity (1–10)
Stabilizer
ON / OFF
Monitor output mode
CRT / LCD
Communication function
RS485 communication, half duplex (models with communication function only)
Power source
24 V AC ± 10% (50/60 Hz ± 1 Hz) or 12 V DC ± 10%
Power consumption
DC12V
260mA
AC24V
220mA, 3.1W
Operating temperature/humidity
-10°C to +50°C, 85% or lower humidity (no condensing)
Storage temperature/humidity
-20°C to +60°C, 95% or lower humidity (no condensing)
External dimensions
60 (W) x 54 (H) x 119.4 (D) mm
Weight
320g
Input/Output
terminals
Video output
BNC
Auto-iris terminal
4P connector
Power supply terminal
2P screwless terminal block AWG16-24
B/W Mode-Fix terminal
2P screwless terminal block AWG22-26
RS485 communication terminal
4P screwless terminal block AWG22-26 (models with communication function only)
Adjustment switch OSD switch
Push-button switch with 5 contact points (in 4 directions and at a central point)
Iris mode switching switch
Slide switch
Termination resistance switch
Slide switch (models with communication function only)
Accessories
OSD Operation Manual, Instruction manual (this document)
* The specifications and/or appearance of the product may change without a prior notice.
