■
LENS ADJUSTMENTS
■
CAMERA SETTINGS for CB55H-Interface board
●
DIP SWITCH FUNCTION
(1) Compensating for backlight
(2) Confirming the iris setting
ON
When back light is so bright
ME
The default setting when DC auto-iris lens is installed
OFF
Normal setting
AE
The default setting when fixed iris lens is installed
CAUTION
: It will be correctly set by adjusting DC Lens control.
CAUTION
: The iris setting is preadjusted as the best condition for
use at time of factory shipment, so it isn't necessary to change settings
(3) Confirming the White Balance
(4)Setting gain control (AGC)
AWC
Ues this under light source below 2500K and over 9500K of natrium.
For adjusting the sensitivity of the camera. Use this setting for shooting
in dark environments.
ON
Normal setting
OFF
Set this when there is excessive noise
ATW
Use this under lightsource between 2500K and 9500K of flourescent
lamp ,incandescent light
1. Adjust the panning(360
˚) and tilt(70˚) position.
2. Setting the zoom position by using Zoom Lever Screw.
3. Setting the focus by using Focus Lever Screw.
CONNECTIONS AND CAMERA SETTINGS
(1) BLC
(2) ME/AE
(3) AWB
(4) AGC
(5) DC Iris volume
(6) 2nd Video out
