Ganz PixelPro ZN-DT2MAP, Руководство пользователя

Страница: 5 / 39

5
1. Network connector
The GANZ PixelPro connects to the network via a standard network cable, and
automatically detects the speed of the local network segment (10BaseT/100BaseTX
Ethernet). This socket could also be used to power the GANZ PixelPro via Power
over Ethernet (PoE). The camera auto-senses the correct power level when using a
PoE switch, router or injector.
2. Audio in
Audio in (line level), for line-in mono signal (only left channel is used from a stereo
signal)
3. Audio out
The Audio output (line level), which could be connected to a line output of a
microphone system or an active speaker with a built-in amplifier.
4. Alarm in / Alarm out
One analog (dry contact) alarm input
One relay output ( 0.5A 125VAC / 1A 30VDC)
Pin Assignment
5. Power Connector
12VDC or 24VAC power connector