![background image](http://html.mh-extra.com/html/ganz/pixelpro-series/pixelpro-series_installation-manual_561097016.webp)
PixelPro GXi Series
ZN-DN312XE Series Installation Guide
03-2014-A
16
6. CONFIGURATION
6.1. Set up network environment
The default IP address of the device is 192.168.XXX.XXX. Users can identify the IP address of the
device from converting the MAC address’s hexadecimal numbers, which is attached to the
device. Be sure that the device and PC are on a same area network before running the
installation.
IP address :
192.168.xxx.xxx
Subnet mask:
255.255.0.0
6.1.1. Generic IP Environment
In case of generic private network environment where IP address 192.168.XXX.XXX are used,
users may view the live streaming images on a web page using the device’s default IP address:
1.
Convert the device’s MAC address to the IP address. Refer to the Hexadecimal-Decimal
Conversion Chart at the end of the manual.
(The MAC address of the device is attached on the side or bottom of the device.)
2.
Start the Microsoft® Internet Explorer web browser and enter the address of the device.
3.
Web streaming and device configurations are supported through ActiveX program. When the
ActiveX installation window appears, authorize and install the ActiveX.
MAC address = 00-1C-B8-01-
23-45
→
IP address = 192.168.
35.69
Convert the last two sets of hexadecimal numbers to decimal numbers.