2
PARTS DESCRIPTION
INSTALLATION
After un-packing, check if the
following items are contained
inside.
¾
MDC(H)-3.6N unit with
Power and BNC Cable…1
¾
User Manual… 1
¾
Screw…4
¾
Plastic Anchors…4
¾
Mating power
connector…1
Note: The camera may be
fixed not only on the wall, but
also on the ceiling.
1.
Take off the housing
(
①
)
before installation
2.
Insert 4 plastic anchors
into the wall or ceiling
(made of concrete) where
the position fit for the
screw hole of the bracket,
then use the Flat Head
Self-Tapping screw
(
②
)
to
fix the camera itself.
(Figure 2) Then fasten the
camera holding screw.
3.
Fix the housing
(
①
)
on the
base, then the installation
is finished.
Figure 2
Figure 1
①
②
