Ganz IP Camera, Руководство пользователя, Страница: 5 / 58

5
1. INTRODUCTION
1.1. Welcome
This manual explains how to interface with the H.264 codec supporting IP camera series using
the Microsoft® Internet Explorer web browser. The Web Page of the product has been
implemented with the protocols below:

HTTP API – Parameter configuration commands

RTP/RTSP – Video, Audio, and Metadata Streaming

Active X program – Image display on client PC
1.2. Getting Started
Before utilizing the web interface, install and connect the camera and other physical devices.
Refer to the hardware manual supplied with your SDK for the product installation steps. The
installation manual provides detailed information for installation and configuration of the
device.
1.3. IP Address Setting
How to find the IP Address of your device:
The product has its unique IP address, and users can identify the address by converting the
MAC address’ last two sets of hexadecimal numbers described on the sticker that is attached
to the device. Refer to the following figure and check how to convert a MAC address to an IP
address. Type the identified IP address in the address bar of the Internet Explorer to access the
web page of the product.
MAC address = 00-13-23-01- 23-45 → IP address = 192.168. 35.69
Convert the last two sets of hexadecimal numbers to decimal numbers.