38
SYSTEM SETUP
SYSTEM-SYSTEM MANAGEMENT
Click on the
‘
SYSTEM MANAGEMENT
’
menu.
SYSTEM INFORMATION:
User can see the system information as below.
S/W version
: Shows the firmware version of the DVR.
H/W version:
Shows the hardware version of the DVR.
VIDEO SIGNAL TYPE:
The DVR automatically switches between PAL and NTSC depending on the
video format of the Channel 1 input signal at the time of power on.
DISK CAPACITY:
The first value shows the amount of hard drive capacity used by recorded footage.
The second value shows the total hard drive capacity installed.
IP ADDRESS:
Shows either the manual IP address entered in the ‘
NETWORK
’ menu, or the automatic
IP address assigned by a DHCP server, if enabled.
MAC ADDRESS:
Shows the MAC (Media Access Control) address of the DVR. It is a unique identifier –
no other network device has the same MAC address.
DDNS DOMAIN NAME
: If DDNS is enabled, the host DDNS server is specified here.
RTSP SERVICE PORT
: The port number that the DVR uses to support remote connection from the client software.
WEB SERVER PORT
: The port number that the DVR uses to support remote connection from Internet Explorer
or other web browsers.
SYSTEM NAME
: This field is used so that notification e-mails can be identified by system name.
