Ganz digimaster DR-4FX1 Скачать руководство пользователя страница 3

 

 

 

 

 

 

 

 

 

 

 

  OVERVIEW

 

 

 

 

Before installation 

Comply with the following instructions to prevent a fire, explosion, system failure or electric  shock. 

  Remove the power supply module before proceeding. 

  Check the input voltage (AC100V

AC240V) to the power supply module before connecting it. 

  Keep the product away from humidity. 

  Ensure that all devices connected to the product should be properly earth-grounded. 

 

In operation mode 

Comply with the following instructions to prevent a fire, explosion, system failure or electric  shock. 

  If  you need to open the cover, consult  with  a service  person  who could help  you do  what  you 

want to do. 

  Do not connect multiple devices to a single power socket. 

  Keep the product away from dust or too much combustible substances (ex: propane gas). 

  Do not touch it with wet hand. 

  Do not insert a conductor in the vent of the ventilation system. 

  Do not apply excessive force to unplug the power cord. 

Disassembly & Cleaning 

  When cleaning on the surface, use a dry cloth. 

  Do not wipe the product using water, paint thinner or organic solvents. 

  Do never dismantle, repair or modify the product by your own. 

During installation 

To prevent an accident or physical injury and to operate DVR properly, please comply with the 
followings 

  Secure at least 18 centimeter of distance between cooling fan and wall for a proper ventilation. 

  Install the product on a flat surface. 

  Keep it away from direct sunlight or excessive temperature. 

While in use 

  Do not apply force to or shake it while using it. 

  Do not move, throw away or put excessive force to it. 

  Using any unrecommended HDD may cause a system failure. Check the compatibility list and 

use only compatible HDDs. 

  {A system failure or data loss caused by an incompatible HDD will void your warranty.} 

 
 
 
 

Содержание digimaster DR-4FX1


















Отзывы: