Ganz Thermal ZNT6-H, Быстрый старт

Страница: 3 / 11

Fixed Camera Quick Start Guide November 2014
3
www.ganzsecurity.com
Ganz Thermal Fixed Mount Components and Hardware Kit
Comparison between Old Base Mounts and New Hybrid Base
Mount
Cable Glands and Power Blocks for the Ganz Thermal Fixed
Mount 320x240 & 640x480 models
Installing the Fixed Mount Camera
You will need the following items (not included) before you can install the
IP Camera (recommended tool list)
 Power source: PoE Switch, 12-24V DC or 24V AC
 IP Network
 Ethernet Cable (STP Cat5 recommended)
 Tripod or Mounting bracket for mounting the IP Camera
 A Phillips head #2 screwdriver
 2 Open End Wrenches – 1 inch (25mm), OR adjustable wrenches
 A 6-inch scale OR ruler
 Torque screwdriver set to 10 inch-pounds (Electric or manual)
 Torx (hole in the middle) T10 Pin-In Security bit – 3.5 inch
(90mm) in Length (not required for shipments with Phillips head
screws)
 Hex Wrench
 RJ-45 connecter and
 RJ-45 Crimping Tool
 Suggested Tools for Analog Video (Fixed Mount):
o
Coax Cable
o
Coax Cable Cutter/Stripper
o
BNC Connector
o
BNC Crimping Tool
Recommended Tools