Ganz Thermal ZNT1-H Series, Быстрый старт

Страница: 2 / 2

CBC AMERICAS CORP. - EAST COAST +1 (919) 230-8700 | WEST COAST +1 (310) 222-8600 | 52 (55) 5280 4660
ganzsecurity.com. 01/17
2
Installing with Bracket/Adaptor
There are currently 7 optional accessories such as wall mount bracket,
corner mount bracket, and so on. Please refer to the corresponding
accessory
’ s installation guide for the installation instructions.
Setting up network environment
The default IP address of the device is 192.168.XXX.XXX. Users can identify
the IP address of the device by converting the MAC addre
ss’s hexadecimal
numbers. The MAC address is at the bottom of the device. Be sure that the
device and the PC are on the same network area before the installation.
Generic IP Environment
Convert the device ’ s MAC address to the IP address. Refer to the
Hexadecimal-Decimal Conversion Table at the end of this manual
.
IPAdminTool
IPAdminTool is a management tool to automatically scan all the network
products for the devices
’ administrative tasks, which include network
configurations, firmware update, device reboot, factory default, and device
organization.
To modify the device ’ s default IP address for a customized network area;
1) Find the device from IPAdminTool ’ s list, and highlight the device ’ s name.
2) Right-click the mouse, and select IP Address , and select either Single or
Multiple depending on the selected number of devices.
3) Type the new network information including IP Address. The image above
shows the Single IP Change window only. Refer to the manual for
IPAdminTool in case you need the instructions to change multiple IP
addresses.
4) Enter ID and PW(if the device ’ s ID and PW have never been changed,
check the checkbox of ‘ Use default ID/PW ’ .)
5) Click Apply .
Viewing video on web page
Once the device ’ s IP address has been identified, type the URL in a web
browser to access the camera. At the first time access, the installation
window like below may pop up.
1) When the browser asks to install the AxUMF software, click Install to
proceed.
2) When the Setup installation pop-up window appears, click Install to
preceed with the rest of the installation.
SETUP page
To setup the device configuraiton:
1) Click Setup on the upper left corner of the web page.
2) Enter the user name and the password when the login page is displayed.
(The default user name and the password are root and pass .)
3) Click OK .
To learn how to set up the camera on the web page for the advanced
configurations, refer to the web page user
’ s manual.
Reboot
*
You can reboot the device via the camera ’ s webpage, too.
1) Go to Setup > Maintenance > Reboot .
2) Click Reboot to reboot the device.
Factory Default
*
You can initialize the current settings to the factory default values via the
camera
’ s webpage, too.
1) Go to Setup > Maintenance > Reset All Settings .
2) Select the items that you want to keep from the initialization among
network settings, user account information, and time zone setting.
3) Click Reset All Settings .
Safe mode
Your device will get restarted in safe mode if the device does not completely
boot certain times. The main causes for safe mode are as follows.
* The power supply is continually unplugged certain times in the middle of system
booting.
* The firmware files required for system booting are damaged.
* There are conflicts in the system settings.
You will see the page to indicate that your device is in safe mode and to
guide you what to do in steps. Follow the instructions on the webpage
according to each step.
NOTE
One of the methods to update firmware is using IPAdminTool. Please refer
to the manaul for IPAdminTool for the detailed procedure.
NOTE
If your device is still in safe mode after trying to update firmware, please
contact your local agency to get further assistance.
Hexadecimal-decimal conversion table
Refer to the following table when converting the MAC address of your device
to IP address.
Hex Dec Hex Dec Hex Dec Hex Dec Hex Dec Hex Dec Hex Dec
0 0 25 37 4A 74 6F 111 94 148 B9 185 DE 222
1 1 26 38 4B 75 70 112 95 149 BA 186 DF 223
2 2 27 39 4C 76 71 113 96 150 BB 187 E0 224
3 3 28 40 4D 77 72 114 97 151 BC 188 E1 225
4 4 29 41 4E 78 73 115 98 152 BD 189 E2 226
5 5 2A 42 4F 79 74 116 99 153 BE 190 E3 227
6 6 2B 43 50 80 75 117 9A 154 BF 191 E4 228
7 7 2C 44 51 81 76 118 9B 155 C0 192 E5 229
8 8 2D 45 52 82 77 119 9C 156 C1 193 E6 230
9 9 2E 46 53 83 78 120 9D 157 C2 194 E7 231
0A 10 2F 47 54 84 79 121 9E 158 C3 195 E8 232
0B 11 30 48 55 85 7A 122 9F 159 C4 196 E9 233
0C 12 31 49 56 86 7B 123 A0 160 C5 197 EA 234
0D 13 32 50 57 87 7C 124 A1 161 C6 198 EB 235
0E 14 33 51 58 88 7D 125 A2 162 C7 199 EC 236
0F 15 34 52 59 89 7E 126 A3 163 C8 200 ED 237
10 16 35 53 5A 90 7F 127 A4 164 C9 201 EE 238
11 17 36 54 5B 91 80 128 A5 165 CA 202 EF 239
12 18 37 55 5C 92 81 129 A6 166 CB 203 F0 240
13 19 38 56 5D 93 82 130 A7 167 CC 204 F1 241
14 20 39 57 5E 94 83 131 A8 168 CD 205 F2 242
15 21 3A 58 5F 95 84 132 A9 169 CE 206 F3 243
16 22 3B 59 60 96 85 133 AA 170 CF 207 F4 244
17 23 3C 60 61 97 86 134 AB 171 D0 208 F5 245
18 24 3D 61 62 98 87 135 AC 172 D1 209 F6 246
19 25 3E 62 63 99 88 136 AD 173 D2 210 F7 247
1A 26 3F 63 64 100 89 137 AE 174 D3 211 F8 248
1B 27 40 64 65 101 8A 138 AF 175 D4 212 F9 249
1C 28 41 65 66 102 8B 139 B0 176 D5 213 FA 250
1D 29 42 66 67 103 8C 140 B1 177 D6 214 FB 251
1E 30 43 67 68 104 8D 141 B2 178 D7 215 FC 252
1F 31 44 68 69 105 8E 142 B3 179 D8 216 FD 253
20 32 45 69 6A 106 8F 143 B4 180 D9 217 FE 254
21 33 46 70 6B 107 90 144 B5 181 DA 218 FF 255
22 34 47 71 6C 108 91 145 B6 182 DB 219
23 35 48 72 6D 109 92 146 B7 183 DC 220
24 36 49 73 6E 110 93 147 B8 184 DD 221
1) Insert the two provided
stem bumpers to the holes
at the bottom of the
sunshield.
2) Place the sunshield on
top of the camera body,
and, snap the sunshield
to the base mount.
MAC address = 00-13-23-01-14-B1 -> IP address = 192.168.20.177
Convert the last two sets of hexadecimal numbers to decimal numbers.
1 CH Encoder
1 CH Encoder
1 CH Encoder
1 CH Encoder
1 CH Encoder
1 CH Encoder
1 CH Encoder
1 CH Encoder
1 CH Encoder
1 CH Encoder
1 CH Encoder
1 CH Encoder
1 CH Encoder
1 CH Encoder
1 CH Encoder
1 CH Encoder
Encoder1
Encoder2
Encoder3
Encoder4
Encoder5
Encoder6
Encoder7
Encoder8
Encoder9
Encoder10
Encoder11
Encoder12
Encoder13
Encoder14
Encoder15
Encoder16
Current PC environment Info
Give a new unique IP address in the last two sets
and mirror other information in the other boxes.
*How to reboot on the device is found in the part names and functions section on the previous page.
*How to do factory default on the device is found
in the Part names and functions section on the previous page.