background image

 

 

Gantom Juni User Guide 

Version 1.0 – 3/31/2021 

SHUTTER ADJUSTMENT AND LOCKING 

The Gantom Juni features 4 independently adjustable framing shutters which are perfect for creating 
rectangles, triangle, trapezoids, slits, or irregular shapes for selective lighting.  This gives you the ability 
to add a crisp angular edge to your beam.  This feature is perfect for highlighting a table or piece of art 
with minimal light spill. 
 
With the light powered on, use the handles to adjust the placement of the shutters.  Note that the side 
which is being adjusted will be mirrored and inverted on the light output.  This means that when you 
adjust the shutter on the RIGHT side of the fixture, the image will be adjusted on the LEFT side. When 
you adjust the shutter on the TOP side of the fixture, the image will be adjusted on the BOTTOM side. 
 
Once the shutters are adjusted, you can lock them in place by tightening one of the highlighted set 
screws. Note that there are 3 set screws around the fixture, but only one must be tightened to lock the 
shutters in place. For best results, we advise tightening down all three set screws equally. 

 

 

Содержание Juni











Отзывы: