Gantner GAT NET.Lock 7000, Установка, настройка и эксплуатация

Страница: 38 / 40

GAT NET.Lock 7000 System
Technical Data
38
HB_GAT-NETLOCK7000--EN_30
www.gantner.com
6.3 GAT NET.Controller M 7000
Nominal voltage U
DC
: 24 V
Power supply unit: External power supply units (use only power supply units approved by GANT-
NER Electronic GmbH for the GAT NET.Controller 7000)
Average power consumption: -
GAT Lock Network: Max. 8 slave controllers GAT NET.Controller S 7000 at one master con-
troller GAT NET.Controller M 7000
Memory: Internal memory for 10,000 bookings. SD card slot for memory expansion,
log files, firmware update or person lists
Digital inputs: 4 x optocoupler
Digital outputs: 4 x relay
Interface between slave and master: RS 485
Interface between master and server: Ethernet
Connectors: - Master to server (Ethernet): RJ 45
- Slave to master (RS 485): RJ 45
- Supply: MOLEX
Housing material: Plastic (ABS)
Dimensions: 310 x 133 x 42 mm (12.2 x 5.24 x 1.65 inch)
Permitted ambient temperature: 0 to +60 °C
Protection type: IP 40
Protection class: I
Weight: Approx. 600 g
Environment class based on VDS 2110: II (conditions in indoor areas)
_ _
Note:
This manual is valid as from October 17
th
2013. It is subject to change,
amendments and changes can be made without prior notice at anytime!