Gantner GAT Access 6100 Series Скачать руководство пользователя | Manualshive

Страница: 35 / 99

background image

GAT Access 6100 Terminal Series
Electrical Connections

www.gantner.com

HB_GAT-ACCESS6100--EN_14

35

4

ELECTRICAL CONNECTIONS

This chapter describes how to complete the network, power supply, and peripheral device cabling connections.

Electric Shock

➔

Touching the power cables may result in electrical shock.

- Electrical connections may only be performed by the specified target group.

- Always follow the instructions described in this chapter.

Damage or Malfunction of the GAT Access 6100

-

Read the information in this chapter carefully before connecting the GAT Access 6100.

-

Complete the cabling connections in the sequence and at the terminals/connectors described.

4.1

Target Group

This chapter contains information for personnel responsible for completing the electrical connections. Observe the
legal requirements for electrical installations where the GAT Access 6100 is being installed, e.g., electrical connection
only by suitably trained electricians, material specifications, and tools used. Also observe the environmental operating
conditions of the GAT Access 6100.

4.2

Power Connection

4.2.1

GAT Access 6100 F Enrollment Station

The GAT Access 6100 F Enrollment Station is delivered with its power supply already connected. The power supply
can be plugged directly into a mains power (U

AC

230 V) outlet.

4.2.2

GAT Access 6100 / GAT Access F BIO / GAT TimeAxx6150

These terminals require 12 or 24 VDC (see technical data) supplied via a separate power supply (LPS and SELV -
Limited Power Source and Safety Extra-Low Voltage). GANTNER offers different power supplies, e.g., GAT SP 014/1
(Part No. 557787) or GAT SP 031/1 (Part No. 246933), to suit various applications.

NOTE!

If multiple terminals are sharing a single power supply, always check the maximum power output of the

power supply. For example, one GAT SP 014/1 can supply two GAT Access 6100 terminals.

«
...
33
34
35
36
37
...
»

Содержание GAT Access 6100 Series




































































































Отзывы:

Нет отзывов

Похожие инструкции для GAT Access 6100 Series

Бренд: TEC Страницы: 24

PDK 220B-CWG13L

Бренд: IEE Страницы: 7

rexroth IndraControl VAC 08.1

Бренд: Bosch Страницы: 40

Rexroth ctrlX I/O XI312204

Бренд: Bosch Страницы: 8

Бренд: Omron Страницы: 183

Бренд: Omron Страницы: 308

MSR JC-1290 KB series

Бренд: Glancetron Страницы: 30

Бренд: Uniwell Страницы: 239

DD2060 X Series

Бренд: Bilanciai Страницы: 4

Бренд: UTC RETAIL Страницы: 8

CI 3000 - COMPATIBILITY LIST

Бренд: VDO Страницы: 13

Бренд: Vector Graphic Страницы: 72

Бренд: EBN Страницы: 40

Бренд: TD Страницы: 36

Бренд: Bio-office Страницы: 126

Бренд: Partner Страницы: 2

Бренд: ESA AUTOMATION Страницы: 4

Бренд: ZKTeco Страницы: 61

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды