Basic Functions
14
Hydromette
®
BL LG 17
2.3.1
Measurement Menu
The last measurement with the note
"Hold"
is shown here.
A new measurement can be started in this menu by pressing the
"M"
button.
During the measuring process, the "Hold" symbol disappears from
the display. After releasing the "M" button, the measured value is
saved. The "Hold" symbol is displayed again.
If the current measured value of the air velocity is greater than the
stored maximum value, the
“Max“
symbol flashes on the display.
The maximum value is automatically stored in the memory.
If the current measured value of the air velocity is smaller than the
stored minimum value, the
“Min“
symbol flashes on the display.
The storage method corresponds to that of the maximum value.
2.3.2
Settings
The following settings can be made in this menu:
Area:
selection option for circle with diameter specification or
rectangle with length and width specification
Averaging:
for a calmer display in the case of highly
fluctuating flow, the display value can be averaged over
several values
Units:
selection of the desired units of measurement
Language
Brightness
Limits:
limit settings for alarm signals
C.Temp.:
setting of the compensation temperature
C.Pressure:
setting of the compensation pressure
