G&L MMC-A2, Руководство по оборудованию

Страница: 51 / 192

Standalone MMC Control
G & L Motion Control Inc. MMC Hardware Manual 43
Figure 4-2: Block I/O Breakout Box Dimensions
4.6.3 User Port
The 15-pin HD male D-sub User Port connector (labeled “USER
PORT” on the front of the Control) provides RS232 and RS485
serial communication between a serial device and the Control
•
Pin descriptions are provided in Table 4-14
•
Pin assignments are provided in Table 4-15
•
The available Flying Lead cable is described in Table 4-16.
•
The available RS-232 Exter HMI cable is described in Table
4-17.
•
The available RS-485 Exter HMI cable is described in Table
4-18.
•
Available Breakout Boxes and Cables are described in
Table 4-19 .
•
Breakout Box dimensions are shown in Figure 4-3
1.750”
2.250”
3.000”
1
6
1.750”
5
9