G&K HK-Controller 20, Инструкция по установке и эксплуатации

Страница: 24 / 36

Setup menu
5 · G&D HK-Controller 20
Setup menu
The setup menu enables you to view and change the add on’s configuration settings.
In addition, you can call up information about the installed firmware version and test
the functions of the panel buttons.
Preparations for using the setup menu
Before you can open the setup menu, you need to install a device driver to address
the Service socket and to establish a connection in the terminal emulator.
Installing the device driver
Install the device driver CP210x USB to UART Bridge VCP to be able to establish a connec-
tion in the terminal emulator.
The driver provides the Service socket (connected via service cable) as virtual serial
interface (COM port).
How to install the device driver to address the
Service
socket:
1. In a web browser, open the website
www.gdsys.de
.
2. Go to
Downloads > Drivers &Tools
.
3. Download the device driver
CP210x USB to UART Bridge VCP
for the operating system
on your computer.
4. Execute the file and follow the instructions of the installation wizard.