G&D VisionXS-IP-F-DP-HR, Инструкция по установке и эксплуатации

Страница: 143 / 248

Installation
G&D VisionXS-IP-F-DP-HR · 14
English
Connecting keyboard and mouse of consoles and other devices
Keyb./Mouse: Connect the mouse and/or the keyboard of the console to this interface.
Generic: You can connect additional USB input devices, USB mass storage devices,
and/or a supported display or tablet to this interfaces.
Activate the generic USB mode (see (De)Activating an USB keyboard or the »Generic USB«
mode on page 82) if you want to connect another USB input device or USB mass
storage device. In this mode, any data of the USB device is not altered when transmitted
to the computer module.
IMPORTANT: If the generic USB mode is active, the OSD cannot be operated by a
keyboard connected to the Generic socket.
IMPORTANT:
This product allows simultaneous use of up to five GenericUSB
devices via a console module. For this, both the used console module and the
used computer module must support the use of up to five GenericUSB devices.
NOTE: There are three Generic interfaces on the console module. You need a USB
hub or a USB composite device to connect four or five generic USB devices.
The two Keyb./Mouse interfaces cannot be used for generic USB mode.
Line Out Serial DP Out Generic Keyb./Mouse Line Out Serial DP Out