G&D U2+R, Установка и эксплуатация, Страница: 47 / 56

User module »U2+R-Fiber-CON«
Target and user modules of the U2+R series · 17
English
Installation
Connecting the console devices
Serial:
Connect the serial end device to this interface.
USB 2.0 Devices: Connect up to three USB devices to these interfaces.
Transmission|Tx: Insert the LC plug of a compatible optical fibre cable. Connect the
other end of the cable to the Rx interface of a Dynamic Port provided at the matrix
switch.
Transmission|Rx:
Insert the LC plug of a compatible optical fibre cable. Connect the
other end of the cable to the
Tx
interface of the same
Dynamic Port
provided at the
matrix switch.
USB 2.0 Devices: Connect up to three USB devices to these interfaces.
Power In:
Connect the power cable to the power pack and a power outlet.
IMPORTANT: The devices use components with laser technology which comply
with laser class 1.
They meet the requirements in accordance to EN 60825-1:2014 as well as
U.S. CFR 1040.10 and 1040.11 .
Mind the following instructions when dealing with laser beams:
 Avoid direct eye exposure to beam on page 3
 Always connect optical connections or cover them with protection caps on page 3
 Only use G&D certified transmission modules on page 3
NOTE: Use optical fibres with LC plugs to connect the devices. The cables are
available as accessories.
Serial
U2+R-CON
USB 2.0 Devices
Power In USB 2.0 Devices Service
Power
Transmission
Class 1
Laser Product