Configuration
40
· G&D miniMUX4
Changing select keys
The default configuration provides the select keys
1
to
4
to access the computers
connected to the KVM switch.
For example, access Computer 4 by pressing
4
(standard:
Ctrl+4
) in the
default configuration. You can adjust the select keys to your needs.
How to select a different set of select keys:
1. Press
Ctrl+Num
(standard) to open the On-Screen Display.
2. Press
F1
to open the
Function
menu.
3. Use the
Arrow keys
to select
System Config
and press
Enter
.
4. Use the
Arrow keys
to select
Select Keys
and press
Space
to select one of the follow-
ing options:
5. Press
F1
to save your settings.
Further information:
Changing the mode of »CPU« interfaces
In the default configuration, the KVM switch is configured to connect computers to
the
CPU
interfaces.
If you want to connect a slave switch to one of the
CPU
interfaces, change the mode of
the interface accordingly. Now, the master switch can access the computers con-
nected to the slave switch.
Detailed information about this topic is given in the paragraph
0
...
9:
Enable select keys
0
to
9
NUM 0
...
9
Enable select keys
NUM 0
to
NUM 9
A
...
K:
Enable select keys
A
to
K
F1
...
F10:
Enable select keys
F1
to
F10
