G&D miniMUX2, Инструкция по установке и эксплуатации

Страница: 52 / 72

Configuration
15 · G&D miniMUX2
Configuration settings
Disabling/Enabling the hotkey delay
In the default settings of the switch, the
Backspace
(default:
Ctrl+Backspace
)
key combination must be pressed for seven seconds to start the setup mode.
If you want to start the setup mode directly after having pressed the key combina-
tion, the hotkey delay can be disabled.
How to disable/enable the hotkey delay:
Setu
p Mode
1. Press
Backspace
(default:
Ctrl+Backspace
) simultaneously to enable
the setup mode.
If the hotkey delay is active, press the key combination for
seven seconds
.
2. Press one of the setup keys listed below to enable/disable the hotkey delay:
7
 enables hotkey delay
8
 disables hotkey delay
Setu
p Menu
1. Use the terminal emulator to establish a connection to the KVM switch
and connect the serial data cable to the Service socket.
2. Use the Arrow  or Arrow  keys to select the Hotkey Delay entry.
3. Press the Space key (repeatedly) to disable/enable the hotkey delay:
Yes  enables hotkey delay
No  disables hotkey delay
4. Press the S key to save your settings.