G&D DVI-Vision-CAT-AR, Инструкция по установке и эксплуатации

Страница: 101 / 140

Configuration
G&D DVI-Vision-CAT · 28
English
Opening the on-screen display via double keypress
As an alternative to opening the on-screen display (OSD) with the hotkey Hot-
key+Num or Double Num you can also open the OSD by pressing a configured
key twice.
How to enable/disable the activation of the on-screen display via double key-
press:
OSD
1. Press Ctrl+Num (default) to open the on-screen display.
2. Select the row System setup and press Enter .
3. Select the row Hotkey and press Enter .
4. Under OSD via 2x keypress select one of the following options:
Off  OSD cannot be opened via double keypress ( default )
Ctrl  OSD is opened by pressing the Ctrl key twice
Alt  OSD is opened by pressing the Alt key twice
Alt Gr  OSD is opened by pressing the Alt Gr key twice
Win  OSD is opened by pressing the Windows key twice
Shift  OSD is opened by pressing the Shift key twice
Print  OSD is opened by pressing the Print key twice
5. Press F2 to save your settings.
Config
Pan
el
1. Click on KVM Extenders > [All Extenders] on the directory tree.
2. Double-click the computer module of the KVM extender to be configured.
3. Click the General tab.
4. Under OSD via double keypress select one of the following keys.
Off  OSD cannot be opened via double keypress ( default )
Ctrl  OSD is opened by pressing the Ctrl key twice
Alt  OSD is opened by pressing the Alt key twice
Alt Gr  OSD is opened by pressing the Alt Gr key twice
Win  OSD is opened by pressing the Windows key twice
Shift  OSD is opened by pressing the Shift key twice
PrtSc  OSD is opened by pressing the Print key twice
5. Click OK to save your changes.