G&D DP1.2-Vision-Fiber, Инструкция по установке и эксплуатации

Страница: 107 / 152

Configuration
G&D DP1.2-Vision-Fiber · 28
English
Operating the on-screen display
The on-screen display is operated with the console keyboard. The following table
shows you a list of frequently used keys:
Arrow keys: Press the arrow keys Up and Down (in some menus also Left and
Right ) to move the cursor between the different menu items.
Enter:
Use this key to confirm inputs of open a submenu.
Esc: This key closes the displayed menu and shows the superior
menu.
A message is shown if entries are changed but not saved.
Tab key:
Use this key to move the cursor within the list field from one
menu item to the next (or vice versa).
F2: Press this key to save your settings.
The displayed menu closes after the settings are saved and the
superior menu is displayed again.
F8:
Press this key to switch between the different options of a menu
item.
Ctrl+F8: Configuration settings with many options support this hotkey
to open a clearly-arranged list containing all options.