G&D DP-Vision-CAT Series, Инструкция по установке и эксплуатации

Страница: 112 / 168

Configuration
G&D DP-Vision-CAT · 25
English
The basic operation of the on-screen display (see page 25) and the web application
Config Panel (see page 28) is described on the following pages.
Operating the on-screen display at the console
The on-screen display (OSD) – just like the web application Config Panel , which is
described on the following – can be used to change the configuration of the KVM
extender.
The on-screen display can be opened by pressing a configured hotkey at the user
module. You can view and edit the settings of the KVM extender only in the remote
OSD of the computer module .
Showing the on-screen display at the console
How to open the on-screen display:
1. Press Ctrl+Num (standard) to open the on-screen display.
Function Default setting Page
Selecting a keyboard layout for inputs via OSD German 55
Resetting the default settings 57
Changing the colour of the information display light green 58
Information display temporary 59
Adjusting the transparency of the on-screen display average transparency 60
Automatic closing of the OSD after inactivity disabled 61
Changing the position of the information dispaly left upper corner 62
Changing the position of the on-screen display centred 63
NOTE: Use the remote hotkey (default: Ctrl + Num ) at the console to open and config-
ure the remote OSD of the computer module and the local hotkey (default: Alt + Num )
to open and configure the local OSD of the user module.
During the starting process of the user module, the settings of both hotkeys are
shown (see Starting process on page 17).